Mortara Instrumentís ELI 100 is a portable interpretive electrocardiograph designed to be fast and easy to use. It acquires and prints a 12-lead ECG at the touch of a single key.
The printout, on 108 mm wide paper, offers a variety of formats:3 or 4 channel in automatic mode and 3 or 6 channel during rhythm recording.
The ELI 100ís lead fail detection and signal quality check ensure optimal signal acquisition, reducing the need for ECG re-acquisition and thereby lowering operating expenses.
The LCD presents the user friendly interface which prompts the user for commands and displays the unitís status.
The full alphanumeric keyboard increases staff efficiency by making patient data entry fast and simple.
The optional internal modem provides the means to communicate with the E-Scribe/NT data management system or to transmit to the Federal Aviation Administration.
The ELI 100ís standard 40 ECG internal storage capacity can be expanded to 150 ECGs.
Included in this sale:
- Mortara Instrumentís ELI 100
- EKG Cables
- Built in Printer
- 90 Day warranty
Weight: 11 pounds (4.9 kg)
- 11.25" x 11.50" x 3.75"
- (28.1 x 28.7 x 9.3cm)
- 100-240VAC at 50 or 60Hz,
- or internal batteries (more than 1,000 ECG's per battery charge.)
- Arm lead reversal detection
- lead off and/or artifact detection
- drift reduction
- AC interference rejection.
Instrument Type: 12-Lead Electrocardiograph
Input Channels: Simultaneous acquisition of all leads
Standard Leads Acquired: I, II, III, aVR, aVF, V1, V2, V3, V3, V5, V6
Digital Sampling Rate:
- 10,000 s/sec/channel used for pacemaker spike detection.
- 500 s/sec/channel used for recording and analysis
Recording Technique: Computer controlled thermal dot array (200 dots/inch)
Paper Type: Thermal sensitive, full grid, 108mm x 30m
Thermal Writer Speeds: 5, 10, 25, 50 mm/s
Sensitivity: 5, 10, or 20 mm/mV
Device Classification: Type 1, Class CF
Input Impedence: Meet or exceed the requirements of ANSI / AAMI EC11-1991
Input Dynamic Range: Meet or exceed the requirements of ANSI / AAMI EC11-1991
Electrode Offset Tolerance: Meet or exceed the requirements of ANSI/AAMI EC11-1991
Frequency Response: Meet or exceed the requirements of ANSI / AAMI EC11-1991
Patient Leakage Current: Meet or exceed the requirements of ANSI / AAMI ESI -1993
Chassis leakage current: Meet or exceed the requirements of ANSI / AAMI ESI - 1993